NSTL国家科技图书文献中心

1. Tribological Investigation of La 2 O 3 Dispersed W-Ni-Cu Heavy Alloy Processed through Powder Metallurgy Process NSTL国家科技图书文献中心

Shakunt, Navindra Sh... | Upadhyaya, Anish - 《Journal of Materials Engineering and Performance》 - 2025,34(2) - 1596～1606 - 共11页

摘要： C for 1 h under an inert atmosphere, wear* and* | wear tester by using a WC ball as a counter body | . Important parameters such as coefficient* of friction (CoF* | ), wear* rate, and weight loss at various loads were* | with increased load, while wear* rate and wear loss*

关键词： adhesion | ball-on-disk wear | coefficient of friction | tungsten heavy alloy | wear rate

2. Tribological and mechanical behaviors of Fe3O4NPs reinforced UHMWPE biocomposite NSTL国家科技图书文献中心

Wafa Khairallah | Riadh Autay ... - 《Journal of Thermoplastic Composite Materials》 - 2025,38(May.) - 1950～1967 - 共18页

摘要：. Wear* and friction behaviors were studied using a* | surface morphology and to investigate wear* mechanisms* | UHMWPE matrix hardness and wear* resistance. A maximum* | hardness and wear* resistance in addition to a good* | increased the coefficient* of friction but there is no*

关键词： Ultra high molecular weight polyethylene | magnetite nanoparticles | wear | coefficient of friction | mechanical properties

3. Prediction of Wear in Start-Stop Systems Using Continuum Damage Mechanics NSTL国家科技图书文献中心

Salehi, Soroosh | Ghatrehsamani, Sahar ... - 《Tribology letters》 - 2025,73(1) - 共10页

摘要： wear volume subsequent to the start-stop cycles. A | to sufficiently cool, thereby increasing wear | reduces wear* and enhances the system's lifespan.* | A vehicle start-stop system automatically | shuts down and restarts the internal combustion engine

关键词： Continuum damage mechanics (CDM) | Wear coefficient | Start-stop system (S-S) | Adhesive wear | Archard law | Temperature field

4. Sliding wear behaviors of medium-carbon high-strength bainitic steel treated by boro-austempering treatment NSTL国家科技图书文献中心

Zhao, Siyang | Liu, Man ... - 《Engineering failure analysis》 - 2025,170 - 109257～ - 共16页

摘要： parameters of wear* medium and friction coefficient, the* | surface microhardness and high wear* resistance. In this* | microstructure, wear* properties, and wear mechanism of the* | microscope, micro-scratch experiment, and sliding wear | and wear* resistance. The surface microhardness*

关键词： Boro-austempering | Bainitic steel | Sliding wear | Friction coefficient | Adhesion property

5. Effect of 3D interconnected Zr-BN based hybrid filler on the tribological properties of carbon fiber reinforced epoxy composites NSTL国家科技图书文献中心

Kuila, Chinmoy | Maji, Animesh ... - 《Tribology International》 - 2025,202 - 共12页

摘要： coefficient of friction (COF) and specific wear rate (W-s | requires a multifunctional composite with superior wear | capability. Exceptional wear* resistance is crucial for* | with excellent anti-wear* performance is the primary* | wear performance of the corresponding composites

关键词： Coefficient of friction | Specific wear rate | Thermal interface materials | Wear debris

6. Sudden drop in friction coefficient of extruded Mg matrix composites NSTL国家科技图书文献中心

Mami Asano | Tomoko Hirayama ... - 《CERAMICS INTERNATIONAL》 - 2025,51(11) - 15043～15048 - 共6页

摘要： the hardness and enhancing the wear* rate. In* | addition, the hardness is closely related to the wear | that the friction coefficient* is suddenly down to* | (in other words, wear* testing period), at which this* | suddenly decrease the friction coefficient, and this

关键词： Magnesium composite | Hardness | Wear rate | Friction coefficient | Surface energy

7. An investigation on the performance of vehicle brake pads developed from Cortaderia selloana based biomass NSTL国家科技图书文献中心

Yavuz, Hicri | Bayrakceken, Huseyin ... - 《Biomass Conversion and Biorefinery》 - 2025,15(4) - 5293～5302 - 共10页

摘要： coefficient and wear rate experiments were carried out on a | signs of abrasive wear. High friction coefficient* and* | coefficient and low wear rate for the brake pads with the | wear rate increased while the average friction | coefficient decreased in the brake pad samples using 18

关键词： Brake pad | Vehicle technology | Coefficient of friction | Cortaderia selloana | Wear rate

8. Investigations on the high-temperature wear behaviour of LM25 aluminium alloy/silicon carbide foam interpenetrating phase composites synthesized using gas pressure infiltration NSTL国家科技图书文献中心

M Senthilkumar | Satish VT ... - 《Surface Topography: Metrology & Properties》 - 2025,13(1) - 015005～015005 - 共19页

摘要： low wear* rate and higher coefficient of friction* | applications, it is necessary to study their wear* behaviour* | solemnly envisioned to examine the high-temperature wear | wear testing apparatus in which the pin specimen | used to perform the wear* study. The experimental*

关键词： SiC foam | Interpenetrating phase composites | Wear rate | Coefficient of friction | Response surface methodology | Worn surface morphology

9. Study on tribological properties of carbon fiber surface-enhanced 7075 Al alloy NSTL国家科技图书文献中心

Mu Yuan | Qingnan Meng ... - 《Applied Surface Science》 - 2025,681(Feb.1) - 161573.1～161573.10 - 共10页

摘要： improve the wear* resistance of the 7075 Al alloy surface* | effects of carbon fiber additions and speed on the wear | in the sample, the lower the coefficient* of* | vol% still maintained a low coefficient* of friction* | in turn affects the coefficient* of friction of the*

关键词： 7075 Al alloy | Carbon fiber | Coefficient of friction | Wear rate | Water environmental

10. Tribological and Mechanical Behavior of Brake Composite with ANN and TOPSIS NSTL国家科技图书文献中心

Konada, Naresh Kumar | Oktem, Hasan ... - 《Journal of Materials Engineering and Performance》 - 2025,34(2) - 1483～1500 - 共18页

摘要： variation of specific wear* rate and coefficient of* | formed into samples for performing wear* test. The* | experiment for producing lower wear* and the desired* | coefficient of friction. The samples were also tested for | that, sample BRZ-III possess lower wear* rate and*

摘要： C for 1 h under an inert atmosphere, wear* and* | wear tester by using a WC ball as a counter body | . Important parameters such as coefficient* of friction (CoF* | ), wear* rate, and weight loss at various loads were* | with increased load, while wear* rate and wear loss*

关键词： adhesion | ball-on-disk wear | coefficient of friction | tungsten heavy alloy | wear rate

摘要：. Wear* and friction behaviors were studied using a* | surface morphology and to investigate wear* mechanisms* | UHMWPE matrix hardness and wear* resistance. A maximum* | hardness and wear* resistance in addition to a good* | increased the coefficient* of friction but there is no*

关键词： Ultra high molecular weight polyethylene | magnetite nanoparticles | wear | coefficient of friction | mechanical properties

摘要： wear volume subsequent to the start-stop cycles. A | to sufficiently cool, thereby increasing wear | reduces wear* and enhances the system's lifespan.* | A vehicle start-stop system automatically | shuts down and restarts the internal combustion engine

关键词： Continuum damage mechanics (CDM) | Wear coefficient | Start-stop system (S-S) | Adhesive wear | Archard law | Temperature field

摘要： parameters of wear* medium and friction coefficient, the* | surface microhardness and high wear* resistance. In this* | microstructure, wear* properties, and wear mechanism of the* | microscope, micro-scratch experiment, and sliding wear | and wear* resistance. The surface microhardness*

关键词： Boro-austempering | Bainitic steel | Sliding wear | Friction coefficient | Adhesion property

摘要： coefficient of friction (COF) and specific wear rate (W-s | requires a multifunctional composite with superior wear | capability. Exceptional wear* resistance is crucial for* | with excellent anti-wear* performance is the primary* | wear performance of the corresponding composites

关键词： Coefficient of friction | Specific wear rate | Thermal interface materials | Wear debris

摘要： the hardness and enhancing the wear* rate. In* | addition, the hardness is closely related to the wear | that the friction coefficient* is suddenly down to* | (in other words, wear* testing period), at which this* | suddenly decrease the friction coefficient, and this

关键词： Magnesium composite | Hardness | Wear rate | Friction coefficient | Surface energy

摘要： coefficient and wear rate experiments were carried out on a | signs of abrasive wear. High friction coefficient* and* | coefficient and low wear rate for the brake pads with the | wear rate increased while the average friction | coefficient decreased in the brake pad samples using 18

关键词： Brake pad | Vehicle technology | Coefficient of friction | Cortaderia selloana | Wear rate

摘要： low wear* rate and higher coefficient of friction* | applications, it is necessary to study their wear* behaviour* | solemnly envisioned to examine the high-temperature wear | wear testing apparatus in which the pin specimen | used to perform the wear* study. The experimental*

关键词： SiC foam | Interpenetrating phase composites | Wear rate | Coefficient of friction | Response surface methodology | Worn surface morphology

摘要： improve the wear* resistance of the 7075 Al alloy surface* | effects of carbon fiber additions and speed on the wear | in the sample, the lower the coefficient* of* | vol% still maintained a low coefficient* of friction* | in turn affects the coefficient* of friction of the*

关键词： 7075 Al alloy | Carbon fiber | Coefficient of friction | Wear rate | Water environmental

摘要： variation of specific wear* rate and coefficient of* | formed into samples for performing wear* test. The* | experiment for producing lower wear* and the desired* | coefficient of friction. The samples were also tested for | that, sample BRZ-III possess lower wear* rate and*

关键词： bronze fiber | coefficient of friction | prediction methods (ANN, TOPSIS) | wear rate

4008-161-200 800-990-8900

国家科技图书文献中心

摘要： C for 1 h under an inert atmosphere, wear and | wear tester by using a WC ball as a counter body | . Important parameters such as coefficient of friction (CoF | ), wear rate, and weight loss at various loads were | with increased load, while wear rate and wear loss

关键词： adhesion | ball-on-disk wear | coefficient of friction | tungsten heavy alloy | wear rate

摘要：. Wear and friction behaviors were studied using a | surface morphology and to investigate wear mechanisms | UHMWPE matrix hardness and wear resistance. A maximum | hardness and wear resistance in addition to a good | increased the coefficient of friction but there is no

关键词： Ultra high molecular weight polyethylene | magnetite nanoparticles | wear | coefficient of friction | mechanical properties

摘要： wear volume subsequent to the start-stop cycles. A | to sufficiently cool, thereby increasing wear | reduces wear and enhances the system's lifespan. | A vehicle start-stop system automatically | shuts down and restarts the internal combustion engine

关键词： Continuum damage mechanics (CDM) | Wear coefficient | Start-stop system (S-S) | Adhesive wear | Archard law | Temperature field

摘要： parameters of wear medium and friction coefficient, the | surface microhardness and high wear resistance. In this | microstructure, wear properties, and wear mechanism of the | microscope, micro-scratch experiment, and sliding wear | and wear resistance. The surface microhardness

关键词： Boro-austempering | Bainitic steel | Sliding wear | Friction coefficient | Adhesion property

摘要： coefficient of friction (COF) and specific wear rate (W-s | requires a multifunctional composite with superior wear | capability. Exceptional wear resistance is crucial for | with excellent anti-wear performance is the primary | wear performance of the corresponding composites

关键词： Coefficient of friction | Specific wear rate | Thermal interface materials | Wear debris

摘要： the hardness and enhancing the wear rate. In | addition, the hardness is closely related to the wear | that the friction coefficient is suddenly down to | (in other words, wear testing period), at which this | suddenly decrease the friction coefficient, and this

关键词： Magnesium composite | Hardness | Wear rate | Friction coefficient | Surface energy

摘要： coefficient and wear rate experiments were carried out on a | signs of abrasive wear. High friction coefficient and | coefficient and low wear rate for the brake pads with the | wear rate increased while the average friction | coefficient decreased in the brake pad samples using 18

关键词： Brake pad | Vehicle technology | Coefficient of friction | Cortaderia selloana | Wear rate

摘要： low wear rate and higher coefficient of friction | applications, it is necessary to study their wear behaviour | solemnly envisioned to examine the high-temperature wear | wear testing apparatus in which the pin specimen | used to perform the wear study. The experimental

关键词： SiC foam | Interpenetrating phase composites | Wear rate | Coefficient of friction | Response surface methodology | Worn surface morphology

摘要： improve the wear resistance of the 7075 Al alloy surface | effects of carbon fiber additions and speed on the wear | in the sample, the lower the coefficient of | vol% still maintained a low coefficient of friction | in turn affects the coefficient of friction of the

关键词： 7075 Al alloy | Carbon fiber | Coefficient of friction | Wear rate | Water environmental

摘要： variation of specific wear rate and coefficient of | formed into samples for performing wear test. The | experiment for producing lower wear and the desired | coefficient of friction. The samples were also tested for | that, sample BRZ-III possess lower wear rate and

关键词： bronze fiber | coefficient of friction | prediction methods (ANN, TOPSIS) | wear rate

4008-161-200 800-990-8900

国家科技图书文献中心

摘要： C for 1 h under an inert atmosphere, wear* and* | wear tester by using a WC ball as a counter body | . Important parameters such as coefficient* of friction (CoF* | ), wear* rate, and weight loss at various loads were* | with increased load, while wear* rate and wear loss*

摘要：. Wear* and friction behaviors were studied using a* | surface morphology and to investigate wear* mechanisms* | UHMWPE matrix hardness and wear* resistance. A maximum* | hardness and wear* resistance in addition to a good* | increased the coefficient* of friction but there is no*

摘要： wear volume subsequent to the start-stop cycles. A | to sufficiently cool, thereby increasing wear | reduces wear* and enhances the system's lifespan.* | A vehicle start-stop system automatically | shuts down and restarts the internal combustion engine

摘要： parameters of wear* medium and friction coefficient, the* | surface microhardness and high wear* resistance. In this* | microstructure, wear* properties, and wear mechanism of the* | microscope, micro-scratch experiment, and sliding wear | and wear* resistance. The surface microhardness*

摘要： coefficient of friction (COF) and specific wear rate (W-s | requires a multifunctional composite with superior wear | capability. Exceptional wear* resistance is crucial for* | with excellent anti-wear* performance is the primary* | wear performance of the corresponding composites

摘要： the hardness and enhancing the wear* rate. In* | addition, the hardness is closely related to the wear | that the friction coefficient* is suddenly down to* | (in other words, wear* testing period), at which this* | suddenly decrease the friction coefficient, and this

摘要： coefficient and wear rate experiments were carried out on a | signs of abrasive wear. High friction coefficient* and* | coefficient and low wear rate for the brake pads with the | wear rate increased while the average friction | coefficient decreased in the brake pad samples using 18

摘要： low wear* rate and higher coefficient of friction* | applications, it is necessary to study their wear* behaviour* | solemnly envisioned to examine the high-temperature wear | wear testing apparatus in which the pin specimen | used to perform the wear* study. The experimental*

摘要： improve the wear* resistance of the 7075 Al alloy surface* | effects of carbon fiber additions and speed on the wear | in the sample, the lower the coefficient* of* | vol% still maintained a low coefficient* of friction* | in turn affects the coefficient* of friction of the*

摘要： variation of specific wear* rate and coefficient of* | formed into samples for performing wear* test. The* | experiment for producing lower wear* and the desired* | coefficient of friction. The samples were also tested for | that, sample BRZ-III possess lower wear* rate and*