NSTL国家科技图书文献中心

1. Dynamic response and macro‑micro characteristics of red soil in shallow karst collapse area along the railway NSTL国家科技图书文献中心

Hai Shi | Zhenghao Yu ... - 《Bulletin of engineering geology and the environment》 - 2025,84(1) - 45.1～45.20 - 共20页

摘要： accumulation of plastic* deformation during subsequent loading* | of the vibration characteristics* of the surrounding* | weakening effects of both macro and micro characteristics | Karst collapse as a unique environmental | geological hazard in karst areas, easily causes changes in

关键词： Water and soil environmental changes | Karst ground collapse | Red soil | Train intermittent load | Plastic deformation characteristics | Macro-micro characteristics

2. XCT-assisted micromechanical modeling of the effect of pores on the plastic deformation and mechanical characteristics of PBF-LB/M-produced copper alloys NSTL国家科技图书文献中心

H. Beygi Nasrabadi | H. Vafaeenezhad ... - 《Materials Science & Engineering,A.Structural Materials: Properties, Misrostructure and Processing》 - 2025,924(Feb.) - 147836.1～147836.14 - 共14页

摘要： compressive deformation* and mechanical characteristics of* | porosities exhibited homogeneous plastic* deformation. On* | -induced pores on the mechanical characteristics* and* | deformation of PBF-LB/M-produced copper alloys. Several | their incorporated pore characteristics. Due to the

关键词： Laser-based powder bed fusion of metals (PBF-LB/M) | Copper | Porosity | X-ray computed tomography (XCT) | Plastic deformation | Micromechanical modeling

3. Intrinsic characteristics of grain boundary elimination induced by plastic deformation in front of intergranular microcracks in bcc iron NSTL国家科技图书文献中心

Zhao, Zhifu | Wei, Yueguang - 《International Journal of Plasticity》 - 2025,184 - 共19页

摘要： eliminated by plastic* behavior activities prior to crack* | the intrinsic characteristics* of GB elimination. The* | identify the mechanisms of two dependent characteristics | slip characteristics. GB elimination occurs in | cleavage. The identified intrinsic characteristics* of GB*

关键词： Additive grain boundary engineering | Intrinsic characteristics | Grain boundary elimination | Twinning | Dislocation

4. Enhancing strength-ductility synergy of multilayer metals by periodic necking: Experiments and simulations NSTL国家科技图书文献中心

Zhao, Jianfeng | Liu, Baoxi ... - 《Mechanics of materials》 - 2025,201(Feb.) - 1.1～1.17 - 共17页

摘要： performed on the tensile deformation* of multilayer TWIP* | Multilayer metals are typical heterostructured | materials where superior strength-ductility synergy is | sought by combining materials with significant | mismatches in mechanical properties. Strain delocalization

关键词： Multilayer materials | Periodic necking | Ductility | Layer thickness | Interface | STEEL CLAD PLATES | DEFORMATION MECHANISMS | TENSILE DUCTILITY | FRACTURE CHARACTERISTICS | STRAIN DELOCALIZATION...

5. Mechanism of Deterioration of Oil Immersed Louver Contact on Valve Side of UHV Converter Transformer NSTL国家科技图书文献中心

Zhicheng Huang | Fan Liu ... - 《IEEE Transactions on Power Delivery》 - 2025,40(1) - 100～112 - 共13页

摘要： deformation characteristics of louvers. The results indicate | steel skeleton, causing plastic* deformation of the* | experiments, we focus on the wear, corrosion, and plastic | The oil-immersed louver contact is a critical | current-carrying connector between the winding outlet

关键词： Plugs | Insulators | Valves | Contacts | Vibrations | Corrosion | Tail | Oil insulation | Degradation | Flanges

6. ИССЛЕДОВАНИЕ ВЛИЯНИЯ АКУСТИЧЕСКИХ ПОЛЕЙ НА МЕХАНИЧЕСКИЕ И ТЕХНОЛОГИЧЕСКИЕ СВОЙСТВА ТЕХНИЧЕСКОГО ТИТАНА NSTL国家科技图书文献中心

Е. Ю. Ремшев | Г. А. Воробьева ... - 《Физика металлов и металловедение》 - 2025,126(1) - 123～128 - 共6页

摘要：: annealing, AAT and only AAT before plastic deformation | of plastic* deformation of VT1-0 (a decrease in* | strength and ductility characteristics* on the type of* | , which reduces deformation* forces, increases the* | deformation rate.The effect of pre-treatment on the process

关键词： титан ВТ1-0 | термическая обработка | аэроакустическая обработка | пластическая деформация | электропластический эффект | titanium VT1-0 | heat treatment | aeroacoustic treatment | plastic deformation | electroplastic effect

7. Numerical Thermal Analysis of Greased Rolling Bearing Considering Surface Topography and Plastic Deformation NSTL国家科技图书文献中心

Jiaqi Li | Linxue An ... - 《Lubrication Science》 - 2025,37(2) - 129～141 - 共13页

摘要： surface plastic* deformation in the EHL state is at* | , thermal effect is often neglected and surface plastic | deformation is almost not considered. This paper has | characteristics and temperature rise is analysed. The results | In numerical studies of grease lubrication

关键词： grease lubrication | plastic deformation | surface topography | TEHL | thermal effect

8. Characteristics and predictions of accumulative deformation of structured soft soil under long-term cyclic loading NSTL国家科技图书文献中心

Liu W. | Tan J.... - 《Soil dynamics and earthquake engineering》 - 2025,189(Feb.) - 1.1～1.19 - 共19页 - 被引量：2

摘要：, considering the accumulated plastic* deformation of soil* | amplitude and cycle number on the accumulative deformation | characteristics. The results show that the relationship between | the accumulative plastic* strain and cycle number can* | accumulative plastic* strain are presented that incorporate*

关键词： Accumulative deformation | Prediction model | Simulation | Soft soil | Soil structure | Stress sensitivity

9. Performance evaluation of novel energy-absorbing anchor cables with expansion–friction structures for supporting roadways prone to rock bursts NSTL国家科技图书文献中心

Fan D. | Wang A.... - 《Tunnelling and underground space technology》 - 2025,155(Jan. Pt.1) - 1.1～1.20 - 共20页 - 被引量：1

摘要： characteristics manifest as symmetrical plastic deformation and | deformation characteristics and mechanical properties of the | , namely, plastic* expansion deformation and frictional* | structure possesses dual energy absorption characteristics | sliding energy dissipation. The deformation

关键词： Energy-absorbing anchor cable | Evaluation index | Mechanical properties | Rock burst | Structural parameters

10. Atomic-scale perspectives on plastic deformation in homogenous Au bonding: Unraveling the role of diverse material defects NSTL国家科技图书文献中心

Jinhong Liu | Taotao Chen ... - 《Materials Science & Engineering,A.Structural Materials: Properties, Misrostructure and Processing》 - 2025,923(Feb.) - 147697.1～147697.12 - 共12页

摘要： plastic deformation of gold during thermal cycling under | investigates the mechanisms of plastic* deformation in Au-Au* | characteristics, and resistance to oxidation. However, the | faults, and deformation* twins (specifically barrier* | the role of atomic-scale defects in the plastic

摘要： accumulation of plastic* deformation during subsequent loading* | of the vibration characteristics* of the surrounding* | weakening effects of both macro and micro characteristics | Karst collapse as a unique environmental | geological hazard in karst areas, easily causes changes in

关键词： Water and soil environmental changes | Karst ground collapse | Red soil | Train intermittent load | Plastic deformation characteristics | Macro-micro characteristics

摘要： compressive deformation* and mechanical characteristics of* | porosities exhibited homogeneous plastic* deformation. On* | -induced pores on the mechanical characteristics* and* | deformation of PBF-LB/M-produced copper alloys. Several | their incorporated pore characteristics. Due to the

关键词： Laser-based powder bed fusion of metals (PBF-LB/M) | Copper | Porosity | X-ray computed tomography (XCT) | Plastic deformation | Micromechanical modeling

摘要： eliminated by plastic* behavior activities prior to crack* | the intrinsic characteristics* of GB elimination. The* | identify the mechanisms of two dependent characteristics | slip characteristics. GB elimination occurs in | cleavage. The identified intrinsic characteristics* of GB*

关键词： Additive grain boundary engineering | Intrinsic characteristics | Grain boundary elimination | Twinning | Dislocation

摘要： performed on the tensile deformation* of multilayer TWIP* | Multilayer metals are typical heterostructured | materials where superior strength-ductility synergy is | sought by combining materials with significant | mismatches in mechanical properties. Strain delocalization

关键词： Multilayer materials | Periodic necking | Ductility | Layer thickness | Interface | STEEL CLAD PLATES | DEFORMATION MECHANISMS | TENSILE DUCTILITY | FRACTURE CHARACTERISTICS | STRAIN DELOCALIZATION...

摘要： deformation characteristics of louvers. The results indicate | steel skeleton, causing plastic* deformation of the* | experiments, we focus on the wear, corrosion, and plastic | The oil-immersed louver contact is a critical | current-carrying connector between the winding outlet

关键词： Plugs | Insulators | Valves | Contacts | Vibrations | Corrosion | Tail | Oil insulation | Degradation | Flanges

摘要：: annealing, AAT and only AAT before plastic deformation | of plastic* deformation of VT1-0 (a decrease in* | strength and ductility characteristics* on the type of* | , which reduces deformation* forces, increases the* | deformation rate.The effect of pre-treatment on the process

摘要： surface plastic* deformation in the EHL state is at* | , thermal effect is often neglected and surface plastic | deformation is almost not considered. This paper has | characteristics and temperature rise is analysed. The results | In numerical studies of grease lubrication

关键词： grease lubrication | plastic deformation | surface topography | TEHL | thermal effect

关键词： Accumulative deformation | Prediction model | Simulation | Soft soil | Soil structure | Stress sensitivity

关键词： Energy-absorbing anchor cable | Evaluation index | Mechanical properties | Rock burst | Structural parameters

摘要： plastic deformation of gold during thermal cycling under | investigates the mechanisms of plastic* deformation in Au-Au* | characteristics, and resistance to oxidation. However, the | faults, and deformation* twins (specifically barrier* | the role of atomic-scale defects in the plastic

关键词： Au stud bump | Plastic deformation | Dislocation | Stacking fault | Deformation twin | 9R phase

4008-161-200 800-990-8900

国家科技图书文献中心

摘要： accumulation of plastic deformation during subsequent loading | of the vibration characteristics of the surrounding | weakening effects of both macro and micro characteristics | Karst collapse as a unique environmental | geological hazard in karst areas, easily causes changes in

关键词： Water and soil environmental changes | Karst ground collapse | Red soil | Train intermittent load | Plastic deformation characteristics | Macro-micro characteristics

摘要： compressive deformation and mechanical characteristics of | porosities exhibited homogeneous plastic deformation. On | -induced pores on the mechanical characteristics and | deformation of PBF-LB/M-produced copper alloys. Several | their incorporated pore characteristics. Due to the

关键词： Laser-based powder bed fusion of metals (PBF-LB/M) | Copper | Porosity | X-ray computed tomography (XCT) | Plastic deformation | Micromechanical modeling

摘要： eliminated by plastic behavior activities prior to crack | the intrinsic characteristics of GB elimination. The | identify the mechanisms of two dependent characteristics | slip characteristics. GB elimination occurs in | cleavage. The identified intrinsic characteristics of GB

关键词： Additive grain boundary engineering | Intrinsic characteristics | Grain boundary elimination | Twinning | Dislocation

摘要： performed on the tensile deformation of multilayer TWIP | Multilayer metals are typical heterostructured | materials where superior strength-ductility synergy is | sought by combining materials with significant | mismatches in mechanical properties. Strain delocalization

关键词： Multilayer materials | Periodic necking | Ductility | Layer thickness | Interface | STEEL CLAD PLATES | DEFORMATION MECHANISMS | TENSILE DUCTILITY | FRACTURE CHARACTERISTICS | STRAIN DELOCALIZATION...

摘要： deformation characteristics of louvers. The results indicate | steel skeleton, causing plastic deformation of the | experiments, we focus on the wear, corrosion, and plastic | The oil-immersed louver contact is a critical | current-carrying connector between the winding outlet

关键词： Plugs | Insulators | Valves | Contacts | Vibrations | Corrosion | Tail | Oil insulation | Degradation | Flanges

摘要：: annealing, AAT and only AAT before plastic deformation | of plastic deformation of VT1-0 (a decrease in | strength and ductility characteristics on the type of | , which reduces deformation forces, increases the | deformation rate.The effect of pre-treatment on the process

摘要： surface plastic deformation in the EHL state is at | , thermal effect is often neglected and surface plastic | deformation is almost not considered. This paper has | characteristics and temperature rise is analysed. The results | In numerical studies of grease lubrication

关键词： grease lubrication | plastic deformation | surface topography | TEHL | thermal effect

关键词： Accumulative deformation | Prediction model | Simulation | Soft soil | Soil structure | Stress sensitivity

关键词： Energy-absorbing anchor cable | Evaluation index | Mechanical properties | Rock burst | Structural parameters

摘要： plastic deformation of gold during thermal cycling under | investigates the mechanisms of plastic deformation in Au-Au | characteristics, and resistance to oxidation. However, the | faults, and deformation twins (specifically barrier | the role of atomic-scale defects in the plastic

关键词： Au stud bump | Plastic deformation | Dislocation | Stacking fault | Deformation twin | 9R phase

4008-161-200 800-990-8900

国家科技图书文献中心

摘要： accumulation of plastic* deformation during subsequent loading* | of the vibration characteristics* of the surrounding* | weakening effects of both macro and micro characteristics | Karst collapse as a unique environmental | geological hazard in karst areas, easily causes changes in

摘要： compressive deformation* and mechanical characteristics of* | porosities exhibited homogeneous plastic* deformation. On* | -induced pores on the mechanical characteristics* and* | deformation of PBF-LB/M-produced copper alloys. Several | their incorporated pore characteristics. Due to the

摘要： eliminated by plastic* behavior activities prior to crack* | the intrinsic characteristics* of GB elimination. The* | identify the mechanisms of two dependent characteristics | slip characteristics. GB elimination occurs in | cleavage. The identified intrinsic characteristics* of GB*

摘要： performed on the tensile deformation* of multilayer TWIP* | Multilayer metals are typical heterostructured | materials where superior strength-ductility synergy is | sought by combining materials with significant | mismatches in mechanical properties. Strain delocalization

摘要： deformation characteristics of louvers. The results indicate | steel skeleton, causing plastic* deformation of the* | experiments, we focus on the wear, corrosion, and plastic | The oil-immersed louver contact is a critical | current-carrying connector between the winding outlet

摘要：: annealing, AAT and only AAT before plastic deformation | of plastic* deformation of VT1-0 (a decrease in* | strength and ductility characteristics* on the type of* | , which reduces deformation* forces, increases the* | deformation rate.The effect of pre-treatment on the process

摘要： surface plastic* deformation in the EHL state is at* | , thermal effect is often neglected and surface plastic | deformation is almost not considered. This paper has | characteristics and temperature rise is analysed. The results | In numerical studies of grease lubrication

摘要： plastic deformation of gold during thermal cycling under | investigates the mechanisms of plastic* deformation in Au-Au* | characteristics, and resistance to oxidation. However, the | faults, and deformation* twins (specifically barrier* | the role of atomic-scale defects in the plastic